Dell PowerEdge 860 Hardware Owner's Manual (PDF) - Page 17
and DIMM1_B, DIMM2_A and, Gate A20 failure - specifications
View all Dell PowerEdge 860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Table 1-4. System Messages (continued) Message Causes Corrective Actions Error: Incorrect memory configuration. Ensure memory in slots DIMM1_A and DIMM1_B, DIMM2_A and DIMM2_B match identically in size, speed and rank. The installed memory modules are not matched pairs. See "Memory Module Installation Guidelines" on page 68. Error: Remote Access Faulty or improperly installed RAC. Controller initialization failure. Ensure that the RAC is properly installed. See "Troubleshooting Expansion Cards" on page 91. Error 8602: Auxiliary device failure. Verify that mouse and keyboard are securely attached to correct connectors. Loose or improperly connected mouse Replace the mouse. If the problem or keyboard cable; faulty mouse or persists, replace the keyboard. keyboard. Gate A20 failure Faulty keyboard controller (faulty system board). See "Getting Help" on page 103. General failure The operating system is unable to carry out the command. This message is usually followed by specific information. Take the appropriate action to resolve the problem. IDE Primary drive 0 not found Primary drive 0 set as Auto, no disk. Run the System Setup program to correct the settings. See "Using the System Setup Program" on page 29. Invalid memory configuration detected. Potential for data corruption exists! Unsupported DIMMs are installed in the system, or the memory configuration is incorrect. Replace or reconfigure the DIMMs. See "System Memory" on page 67 for memory configuration guidelines, a list of supported DIMMs, and supported memory configurations. Keyboard controller failure Faulty keyboard controller (faulty system board). See "Getting Help" on page 103. Keyboard data line failure Loose or improperly connected Ensure that the keyboard is properly Keyboard failure keyboard cable; faulty keyboard; faulty connected. If the problem persists, keyboard controller. replace the keyboard. If the problem Keyboard stuck key failure persists, see "Getting Help" on page 103. Keyboard fuse has failed. Keyboard fuse has failed. Replace the keyboard. Faulty system board. If the problem persists, the system board is faulty. See "Getting Help" on page 103. Manufacturing mode detected System is incorrectly configured. About Your System 17