Dell PowerEdge C5220 Using the Baseboard Management Controller  - Page 58

Table 1-49., SOL Command, Command, PEF/PET Alerting Commands, NetFn, Supported, LAN Commands

Page 58 highlights

Table 1-48. LAN Commands Command NetFn CMD O/M NOTE: Parameter 192 is used for DHCP Retry by DCS requirement. Supported Table 1-49. SOL Command Command NetFn SOL Activating Transport Set SOL Configuration Parameters Transport Get SOL Configuration Parameters Transport CMD 20h 21h 22h O/M Supported O No O Yes O Yes Table 1-50. PEF/PET Alerting Commands Command NetFn CMD O/M Get PEF Capabilities S/E 10h M Arm PEF Postpone Timer S/E 11h M Set PEF Configuration Parameters S/E 12h M Get PEF Configuration Parameters S/E 13h M Set Last Processed Event ID S/E 14h M Get Last Processed Event ID S/E 15h M Alert Immediate S/E 16h O PET Acknowledge S/E 17h O Supported Yes Yes Yes Yes Yes Yes Yes Yes 58

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

58
NOTE:
Parameter 192 is used for DHCP Retry by DCS requirement.
Table 1-49.
SOL Command
Command
NetFn
CMD
O/M
Supported
SOL Activating
Transport
20h
O
No
Set SOL Configuration Parameters
Transport
21h
O
Yes
Get SOL Configuration
Parameters
Transport
22h
O
Yes
Table 1-50.
PEF/PET Alerting Commands
Command
NetFn
CMD
O/M
Supported
Get PEF Capabilities
S/E
10h
M
Yes
Arm PEF Postpone Timer
S/E
11h
M
Yes
Set PEF Configuration
Parameters
S/E
12h
M
Yes
Get PEF Configuration
Parameters
S/E
13h
M
Yes
Set Last Processed Event ID
S/E
14h
M
Yes
Get Last Processed Event ID
S/E
15h
M
Yes
Alert Immediate
S/E
16h
O
Yes
PET Acknowledge
S/E
17h
O
Yes
Table 1-48.
LAN Commands
Command
NetFn
CMD
O/M
Supported