Dell PowerEdge C8000 Dell PowerEdge C8220 Hardware Owner's Manual - Page 136
Installing the Cooling Shroud
View all Dell PowerEdge C8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Figure 3-9. Removing and Installing the Cooling Shroud 1 screws (2) 2 cooling shroud Installing the Cooling Shroud CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized is not covered by warranty. Read and follow the safety instructions that came with the product. CAUTION: Never operate your system with the cooling shroud removed. The system may get overheated quickly, resulting in shutdown of the system and loss of data. 1 Align and gently press the cooling shroud down on the system board until the anchor tabs snap securely into place. See Figure 3-9. 2 Replace the two screws securing the cooling shroud to the sled tray. See Figure 3-9. 3 Replace the sled. See "Installing a Sled" on page 130. 136 Installing System Components