Dell PowerEdge C8000 Dell PowerEdge C8220 Hardware Owner's Manual - Page 142

1 processor alignment mark (triangle) 2 processor 3 processor shield 4 hook-shaped socket-release lever 5 processor socket 6 socket key (4) 7 bent load lever 8 alignment notch Installing a Processor CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized is not covered by warranty. Read and follow the safety instructions that came with the product. NOTE: When installing only one processor, the processor must be installed in the processor 1 socket. See "System Board Connectors" on page 197 for the location of the processor 1 socket. NOTE: If you are upgrading your processors, prior to upgrading your system, download and install the latest system BIOS version from support.dell.com. Follow the instructions included in the file download to install the update on your system. 1 Unpack the processor if it has not been used previously. 2 If the processor has already been used, remove any thermal grease from the top of the processor using a lint-free cloth. 3 Align the processor with the socket keys on the processor socket. See Figure 3-12. CAUTION: Positioning the processor incorrectly can permanently damage the system board or the processor. Be careful not to bend the pins in the processor socket. 4 With the hook-shaped release and bent load levers on the processor socket in the open position, match the processor with the alignment mark indicator and the socket keys and set the processor lightly in the socket. See Figure 3-12. CAUTION: Do not use force to seat the processor. When the processor is positioned correctly, it engages easily into the socket. 5 Close the processor shield. 142 Installing System Components