Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Getting Started Guide - Page 7

Table 2. System LED Displays System LED Power Status LED Color/Display Green Off Blue Off Amber Description Power is being supplied to the switch. The switch does not have power. The switch is operating normally as a standalone switch or as a stack master. The switch is not the stack master. A fault has occurred or the switch is booting. NOTE: The front-end ports also contain LEDs that provide information about the link status and traffic activity on a port. NOTE: When the ingress air temperature exceeds 60°C, the Status LED turns amber and a major alarm triggers. Table 3. SFP+ Port LEDs Port LED LED Color/Display Description Link LED Off The port is down. Solid green The port is up and can transmit traffic at maximum speed. An SFP + port can transmit at 10G. Solid amber The port is up and is transmitting traffic at lower than maximum speed. An SFP+ port is transmitting at 1G. Activity LED Off No traffic is being transmitted or received on the port. Blinking green Traffic is being transmitted or received on the port. Hardware Overview 7