Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Installation Guide - Page 11
System LED, LED Color, Display, Description, Label, System Power LED
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Figure 2. System LED Displays (I/O Panel) 1 - System Status LED 2 - System Power LED The following table lists the LED definitions for the aggregator. Table 1. System LED Displays System LED Power LED Color/ Display • Green • Off Description • Power is being supplied to the switch. • The switch does not have power. Status • Blue • Off • Amber • The switch is operating normally as a standalone switch or as a stack master. • The switch is not the stack master. • A fault has occurred, or the switch is booting. NOTE: The front-end ports also contain LEDs that provide information about the link status and traffic activity on a port. NOTE: When the ingress air temperature exceeds 60°C, the Status LED turns amber and a major alarm is triggered. Table 2. SFP+ and 10G BaseT Port LEDs Label LED Color/ Display Description Link LED • Off • Solid green • Solid amber • The port is down. • The port is up and can transmit traffic at maximum speed. A SFP+ or BaseT port can transmit at 10G. • The port is up and is transmitting traffic at lower than maximum speed. A SFP+ or BaseT port is transmitting at 1G. Activity LED • Off • No traffic is being transmitted or received on the port. • Blinking green • Traffic is being transmitted or received on the port. Hardware Overview 11