Dell PowerEdge M1000e Fabric OS Command Reference Manual Supporting Fabric - Page 710

2 portCfgShow ve_port tunnel_id -ipsec -qosmap Displays information for the specified FCIP tunnel on the Brocade 7800/FX8-24 (only). To display the tunnel, specify the VE_Port number associated with the tunnel configured on one of the GbE ports. VE_Ports are numbered 16-23 on the Brocade 7800 and 12-31 on the Brocade FX8-24 blade. Displays information for the specified FCIP tunnel on the Brocade 7500/7500E/FR4-18i only. valid tunnel IDs are 0 to 7. On the 7500/7500E/FR4-18i, this option displays IKE and IPSec policy information on IPSec-enabled tunnels. On the Brocade 7800/FX8-24, this option displays whether IPSec is enabled or disabled. If enabled, the key is displayed. This operand is optional. Displays the VC to QoS mapping. This operand is optional and valid only on the 7500/7500E/FR4-18i. Displays supported only on the Brocade 7500/7500E/FR4-18i platforms When executed on the Brocade 7800/FX8-24, the following commands are not blocked, but return no relevant information. mode Displays the mode of the specified GbE port as FCIP or not configured. inbandmgmt Displays any inband management interfaces configured on the Brocade 7500 for a specified GbE port. This command is not supported on the FR4-18i blade. Examples To display the port configuration settings for a single port on a Brocade DCX-4S: switch:admin> portcfgshow 1/3 Area Number: 3 Speed Level: AUTO(HW) Fill Word: 0(Idle-Idle) AL_PA Offset 13: OFF Trunk Port ON Long Distance OFF VC Link Init OFF Locked L_Port OFF Locked G_Port OFF Disabled E_Port OFF Locked E_Port OFF ISL R_RDY Mode OFF RSCN Suppressed OFF Persistent Disable OFF LOS TOV enable OFF NPIV capability ON QOS E_Port AE Port Auto Disable: OFF Rate Limit OFF EX Port OFF Mirror Port OFF Credit Recovery ON F_Port Buffers OFF NPIV Max Login Limit: 126 CSCTL mode: OFF 678 Fabric OS Command Reference 53-1001764-02