Dell PowerEdge M1000e Fabric OS Command Reference Manual Supporting Fabric - Page 846

2 portTrunkArea trunk enabled disabled all Displays configuration details for the port trunk group, including user port, neighboring user port, and master port properties. Displays configuration details for all ports included in a user assigned TA (all ports on which masterless F_Port trunking is enabled). Displays configuration details for all ports not included in a user assigned TA (all portson which masterless F_Port trunking is notenabled). Displays configuration details for all ports on a switch. Examples To enable masterless F_Port trunking on a standalone switch: 1. Disable ports 10-11 by executing portdisable port for each port to be included in the TA. 2. Enable Trunk Area for ports 10-11 with area number 37: switch:admin> porttrunkarea --enable 10-11 -index 11 2009/05/15-12:43:10, [SWCH-1012], 60, FID 128, INFO, sw0, Trunk Area (11) has been enabled for one or more ports Trunk area 11 enabled for ports 10 and 11. 3. Re-enable ports 10-11 by executing portenable port for each port in the TA. 4. Show switch/port information: switch:admin> switchshow [...] Index Port Address Media Speed State Proto [...] 11 10 030b00 id N4 No_Light FC 11 11 030b00 id N4 No_Light FC [...] 5. Display TA-enabled port configuration: switch:admin> porttrunkarea --show enabled Port Type State Master TA DA 10 -- -- -- 11 10 11 -- -- -- 11 11 To disable masterless F_Port trunking on ports 10-11: switch:admin> porttrunkarea --disable 10-11 ERROR: port 11 has to be disabled Disable each port prior to removing ports from the TA. Then reissue the command: switch:admin> porttrunkarea --disable 10-11 Trunk area 11 disabled for ports 10 and 11. 814 Fabric OS Command Reference 53-1001764-02