Dell PowerEdge M605 Web Tools Administrator’s Guide - Page 212

DRAFT: BROCADE CONFIDENTIAL 14 Configuring a port for long distance a. Double-click the Desired Distance field for the port, as shown in Figure 54. b. Enter a number in the field to indicate the distance in kilometers. The allowed values depend on the port capability: • If the port capability is 8 GB, type a number between 10 and 63 inclusive. • If the port capability is 4 GB, type a number between 10 and 125, inclusive. • If the port capability is 2 GB, type a number between 10 and 250, inclusive. • If the port capability is 1 GB, type a number between 10 and 500, inclusive. This value is the upper limit for calculating buffer availability for other ports in the same port group. If the actual distance is more than the desired distance, the port operates in buffer-limited mode. c. Press Enter or click another port entry for the value to be accepted. 6. Click Apply. The warning message, "DLS should be disabled while enabling Long distance link with Credit Recovery" displays. 7. Click Yes to apply the changes, or click No to close the confirmation message window. 184 Web Tools Administrator's Guide 53-1001772-01