Dell PowerEdge M605 Fabric OS Command Reference Manual Supporting Fabric - Page 368
host., password, Fabric OS Error Message Reference Manual, HotCode Load.
View all Dell PowerEdge M605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 368 highlights
2 firmwareDownload Targeted Slots (slot numbers): 8 Server Name or IP Address: 192.168.126.250 Network Protocol (1-auto-select, 2-FTP, 3-SCP) [1]: User Name: userfoo File Name: /home/userfoo/dist/release.plist Password: Verifying the system parameters for firmwaredownload... System parameters checking passed. Checking version compatibility... Version compatibility checking DISABLED. This command will reboot the selected blades and disrupt the virtualization applications on these blades. WARNING: YOU HAVE ELECTED TO DISABLE THE VERSION COMPATIBILITY CHECKING FEATURE. THIS CAN CAUSE THE VIRTUALIZATION SERVICES TO STOP WORKING. If you want to check the version compatibility, please exit and re-enter this command without the "-c" option. Do you want to continue [Y]: y To download SAS firmware and remove the installed SA image at the same time: switch:admin> firmwaredownload -a sas -e 192.168.126.250,\ userfoo,/home/userfoo/dist/release.plist This command will download "sas" and at the same time, it will remove all of the installed SA images on the switch. Do you want to continue [Y]: y Diagnostics The command checks the network connection and other system parameters before initiating firmwareDownload. It may fail if at least one of the following conditions is encountered: • The host is not reachable from the switch. • The user does not have permission on host. • The password is not specified correctly. • Indicated firmware does not exist on the host, or is not in the right format, or is corrupted. • The FTP or SSH service is not running on host. • The platform is not supported by the firmware indicated. • The USB device may not be plugged in correctly. On standalone switches, the device must be plugged into the switch USB port. On enterprise-class platforms, the USB device must be plugged into the Active CP • The USB device is not enabled. Use the usbStorage command on the switch to enable the USB device. On enterprise-class platforms, the command must be run on the Active CP to enable the USB device. • The switch is a single-CP switch in an InterOp fabric and does not support Coordinated HotCode Load. For other return codes, refer to the Fabric OS Error Message Reference Manual. See Also firmwareCommit, firmwareDownloadStatus, firmwareKeyShow, firmwareKeyUpdate, firmwareRestore, firmwareShow, reBoot, slotShow, version 336 Fabric OS Command Reference 53-1001764-02