Dell PowerEdge M605 Fabric OS Command Reference Manual Supporting Fabric - Page 845
Masterless F_Port trunking requires an ISL Trunking license., Displays masterless F_Port trunking
View all Dell PowerEdge M605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 845 highlights
portTrunkArea 2 13. Device Connection Control (DCC) Policy must be removed from ports prior to creating a TA. You can re-enable DCC policy after creating the TA. 14. You cannot assign a TA while AG mode is enabled. Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Masterless F_Port trunking requires an ISL Trunking license. Operands This command supports the following operands: slot On enterprise-class platforms, specifies the slot number, followed by a slash (/). port1[-port2] Specifies a single port or a port range, relative to its slot on bladed systems. For example, 9/8-15 on an enterprise-class platform indicates slot 9, ports 8 - 15. Port ranges on Condor, Condor2 and Golden-Eye2 platforms should fall in the octet (8 port) trunk range starting from port 0 on a switch or blade. On Golden-Eye platforms, the port range should fall in the quad (4 port) trunk range. Trunking must be enabled on all ports. --enable Creates a TA assigned to the specified ports. Use this option with one of the following operands: -area area_number On single processor switches, specifies the port area number for the static TA to be created. The TA must fall within the 8 port trunk group starting from port 0 on a switch or blade. The TA must be a default area of an existing port in a given port group. However, you may add ports to the trunk group even when a trunk group has already been assigned by using the same area of the octet trunk group. Use switchShow for a list of valid port area or index numbers. -index port_index On enterprise-class platforms, specifies the port index for the static TA to be created. The port index must fall within the 8 port trunk group starting from port 0 on a switch or blade. The TA must be a default index of an existing port in a given port group. However, you may add ports to the trunk group even when a trunk group has already been assigned by using the same index of the octet trunk group. Use switchShow for a list of valid port indexes. --disable Removes specified ports from a TA. If a port with the same default area as the TA assigned for the trunk group is removed, all ports in the trunk group must be explicitly specified for removal. all Optionally removes all TA assigned ports on the switch. This option disables masterless F_Port trunking on all ports. All TA assigned ports must be disabled for this option to succeed. --show Displays masterless F_Port trunking information. When using this option, specify one of the following operands: [slot]/port1[-port2] Displays configuration for a specified port or port range. Fabric OS Command Reference 813 53-1001764-02