Dell PowerEdge M605 Fabric OS Command Reference Manual Supporting Fabric - Page 706
portCfgShow, Port mode information
View all Dell PowerEdge M605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 706 highlights
2 portCfgShow portCfgShow Displays port configuration settings. Synopsis portcfgshow portcfgshow [slot/]port portcfgshow -i [index1[-index2] [...] [-f]] portcfgshow -slot slot1[-slot2] [...] portcfgshow option [slot/][ge_port] [arguments] [optional_arguments] Description Use this command to display the current configuration of a port. The behavior of this command is platform-specific; output varies depending on port type and platform, and not all options are supported on all platforms. "Non-GbE port displays" When used without operands, this command displays port configuration settings for all ports on a switch, except Gigabit Ethernet (GbE) ports. "Displays supported only on the Brocade 7800 /FX8-24 and on the Brocade 7500/7500E/FR4-18i platforms" Use this command with optional arguments to display the following parameters configured for a GbE port on the Brocade 7800/FX8-24 and on the Brocade 7500/7500E/FR4-18i platforms. • IP interfaces on the GbE port • Static routes on the IP interfaces • Address resolution protocol (ARP) entries • VLAN tag configuration • Fibre Channel over IP (FCIP) tunnel configuration settings - IPSec configuration - QoS mappings (Brocade 7500/7500E/FR4-18i only) "Displays supported only on the Brocade 7500/7500E/FR4-18i platforms" • Port mode information • Inband Management IP addresses and routes (Brocade 7500 only) Non-GbE port displays The following information is displayed when the command is issued for all ports, for a single port, or for one or more port ranges specified by their port index numbers or slot numbers: Area Number Displays the port area number. This field is displayed only when portCfgShow is executed for a single port. Speed Displays Auto for auto speed negotiation mode, or a specific speed of 1, 2, 4, or 8 Gbps. This value is set by the portCfgSpeed command. Fill Word Displays one of the following numeric values: 0(Idle-Idle), 1(arbff-arbff), 2(Idle-arbff), or 3(A-A then SW I-A).This parameter is set by the portcfgFillword command. 674 Fabric OS Command Reference 53-1001764-02