Dell PowerEdge M710HD Fabric OS Command Reference Manual Supporting Fabric - Page 119
cfgAdd
View all Dell PowerEdge M710HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
cfgAdd 2 cfgAdd Synopsis Adds a member to a zone configuration. cfgadd "cfgName", "member[ ;member...]" Description Use this command to add one or more members to an existing zone configuration. This command changes the Defined Configuration. For the change to take effect, enable the configuration with the cfgEnable command. For the change to be preserved across switch reboots, save the configuration to nonvolatile memory with the cfgSave command. Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. When an FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands The following operands are required: "cfgName" Specify a name for the zone configuration, enclosed in double quotation marks. "member" Specify a zone member or a list of zone members to be added to the configuration. The list must be enclosed in quotation marks. Members must be separated by semicolons. Examples To add two new zones to the configuration "Test_cfg": switch:admin> cfgadd "Test_cfg", "greenzone; bluezone" See Also cfgClear, cfgCreate, cfgDelete, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgShow Fabric OS Command Reference 87 53-1001764-02