Dell PowerEdge M710HD Fabric OS Command Reference Manual Supporting Fabric - Page 183

cryptoCfg 2 the same username is configured on all nodes. Different encryption groups can use different usernames so long as all nodes in the group have the same username. Changing the username using -KAClogin renders the previously created keys inaccessible. When changing the username you must do the same on the key vault, and you must change the key owner for all keys of all LUNs through the SKM GUI. For downgrade considerations, refer to the Fabric OS Encryption Administrator's Guide. --show Displays node configuration information. This command requires one of the following mutually exclusive operands: -localEE Displays encryption engine information local to the node. -file -all --rebalance [slot] Displays all imported certificates. The -all parameter is required with the --show -file command. Rebalances the disk and tape containers to maximize throughput. Rebalancing is recommended after containers have been added, removed, moved, failed over, and failed back. This is a disruptive operation. You may have to restart backup applications after rebalancing is complete. Optionally specify a slot number on bladed systems. Function 2. Encryption group configuration Synopsis cryptocfg --help -groupcfg cryptocfg --create -encgroup encryption_group_name cryptocfg --delete -encgroup encryption_group_name cryptocfg --reg -keyvault cert_label certfile hostname | ip_address primary | secondary cryptocfg --dereg -keyvault cert_label cryptocfg --reg -KACcert signed_certfile primary | secondary cryptocfg --set -keyvault LKM | RKM | SKM | TEMS cryptocfg --set -failbackmode auto | manual cryptocfg --set -hbmisses value cryptocfg --set -hbtimeout value cryptocfg --set -quorumsize value cryptocfg --set -systemcard enable | disable cryptocfg --set -replication enable | disable cryptocfg --add -membernode node_WWN cryptocfg --eject -membernode node_WWN cryptocfg --leave_encryption_group cryptocfg --genmasterkey cryptocfg --exportmasterkey [-file] cryptocfg --recovermasterkey currentMK | alternateMK -keyID keyID | -srcfile filename cryptocfg --show -groupcfg Fabric OS Command Reference 151 53-1001764-02