Dell PowerEdge M710HD Fabric OS Command Reference Manual Supporting Fabric - Page 917
TABLE 25, SNMP Trap bit mask values
View all Dell PowerEdge M710HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 917 highlights
snmpConfig 2 -mib_name mib_name Specifies the name of the MIB to be configured. This operand is required if you want to configure MIB traps noninteractively. Valid MIB names include the following. • FE-MIB • SW-MIB • FA-MIB • FICON-MIB • HA-MIB • FCIP-MIB • ISCSI-MIB • IF-MIB • BD-MIB -bitmask bit_mask Specifies the bit mask for the MIB. In Fabric OS v6.4.0 and later, SNMP Traps are identified by their bit mask and can be read directly from the switch configuration. The MIB and trap status (enabled or disabled) status is recorded in a 64- bit counter. The last bit (bit 0) is reserved for the MIB and the remaining bits are reserved for the traps of that MIB. The trap's position is allocated based on the last ID of the trap OID. For example, the last ID of the swEventTrap is 5 so its position will be 5th from the right. Refer to Table 25 for a listing of valid bit masks. TABLE 25 SNMP Trap bit mask values MIB Trap Name Bit mask Default FE-MIB SW-MIB FA-MIB (Fibre Channel FE evants) (switch events) swFault swSensorScn swFCPortScn swEventTrap swFabricWatchTrap swTrackChangeTraps swIPv6ChangeTrap swPmgrEventTrap swFabricSegmentTrap swFabricReconfigTrap swExtTrap (fabric events) connUnitStatusChange(1) connUnitAddedTrap (2) connUnitDeletedTrap (3) connUnitEventTrap (4) 0x1 0x1 0x2 0x4 0x8 0x10 0x20 0x40 0x80 0x100 0x200 0x400 0x800 0x1 0x2 N/A 0x8 0x10 Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Disabled Disabled Disabled Enabled Enabled Enabled Enabled Enabled Fabric OS Command Reference 885 53-1001764-02