Dell PowerEdge M910 Web Tools Administrator’s Guide - Page 270

DRAFT: BROCADE CONFIDENTIAL 17 Establishing authentication policies for HBAs • Select the Authentication Type. The choices are FCAP, DHCHAP, or both. • Select the Switch Authentication Policy Mode. The choices are Passive, Active, On, or Off. • Select the Hash Type used. The choices are SHA1, MD5, or both. • Select the DH-Group Type. The choices are 0 (no DH authentication), 1 (1024 bit), 2 (1280 bit), 3 (1536 bit), or 4 (2048 bit). • Use the Device Authentication Policy Mode selector to set the desired mode. The choices are On, Off, or Passive. • Click Apply. 6. If your authentication method uses a shared secret, select the Shared Secret Keys tab. The Shared Secret Keys screen displays. 7. Select Add. The Add Shared Secret Keys dialog box displays. 8. Browse to select the switch WWN or name and domain ID, or enter the switch WWN or name and domain ID in the Switch WWN: Name/Domain ID field. 9. Enter the shared secret key for the peer device (an HBA in this case) in the Peer Shared Secret and Confirm Peer Shared Secret fields. 10. Enter the shared secret for switch in the Local Shared Secret and Confirm Local Shared Secret fields. 11. Click Add. An entry is added in the Switch WWN box. 12. Click OK. 13. Add more shared secrets, if needed. 242 Web Tools Administrator's Guide 53-1001772-01