Dell PowerEdge M910 Fabric OS Command Reference Manual Supporting Fabric - Page 401

fwFruCfg 2 fwFruCfg Displays or modifies FRU state alert configuration. Synopsis fwfrucfg [--show] Description Use this command to configure field-replaceable unit (FRU) states and actions. Based on these configuration settings, Fabric Watch generates actions when a FRU state changes. When used without operand, this command interactively prompts for user input. To configure email alerts, use fwMailCfg. This command is not applicable to platforms that do not support FRUs. Notes This command requires a Fabric Watch license. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operand: --show Displays the current FRU configuration setting. This operand is optional; if omitted, the configuration prompt displays. Examples To change the FRU state alert configuration: switch:admin> fwfrucfg The current FRU configuration: Alarm State Alarm Action Slot 0 1 Power Supply 0 0 Fan 0 0 WWN 0 0 Note that the value 0 for a parameter means that it is NOT used in the calculation Configurable Alarm States are: Absent-1, Inserted-2, On-4, Off-8, Faulty-16 Configurable Alarm Actions are: Errlog-1, E-mail-16 Slot Alarm State: (0..31) [0] 3 Slot Alarm Action: (0..17) [1] Power Supply Alarm State: (0..31) [0] Power Supply Alarm Action: (0..17) [0] Fan Alarm State: (0..31) [0] Fan Alarm Action: (0..17) [0] WWN Alarm State: (0..31) [0] WWN Alarm Action: (0..17) [0] See Also Fru configuration successfully changed fwHelp, fwMailCfg Fabric OS Command Reference 369 53-1001764-02