Dell PowerEdge M910 Fabric OS Command Reference Manual Supporting Fabric - Page 410

2 fwSet fwSet Synopsis Sets port persistence time. fwset --port --persistence seconds Description Use this command to set port persistence time, a parameters controlled by Fabric Watch. Port persistence time specifies the time in seconds during which a port must persistently be in a marginal state before being labeled as such. port persistence is a switch-wide parameter. Use portThconfig to display port persistence time. Notes This command requires a Fabric Watch license. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands The following operands are required: --port --persistence seconds Specifies the time, in seconds, during which a port must be persistently in a marginal state before being recognized as such. Examples To set the port persistence time to 18 seconds: switch:user> fwset --port --persistence 18 See Also fwHelp, portThconfig 378 Fabric OS Command Reference 53-1001764-02