Dell PowerEdge M910 Fabric OS Command Reference Manual Supporting Fabric - Page 650
To delete a VLAN tag entry
View all Dell PowerEdge M910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 650 highlights
2 portCfg IPv6 Address Len Gateway Metric Flags 2000:: 64 * 0 U C 2000::10 128 * 0 U H L 2000::11 128 * 0 U H L 2000::1:250 128 * 0 U H L 2001:: 64 2000::1:250 0 U G fe80:: 64 * 0 U C ff01:: 32 * 0 U C ff02:: 32 * 0 U C Flags: U=Usable G=Gateway H=Host C=Created(Interface) S=Static L=LinkLayer(Arp) To delete a static IP route using an IPv4 address: switch:admin> portcfg iproute ge0 delete 172.16.0.0 255.255.0.0 Operation Succeeded To create a network-wide permanent VLAN tag entry with a VLAN ID of 200 and an L2 CoS value of 5 (no destination address): switch:admin> portcfg vlantag ge2 add 192.168.2.10 200 5 Operation Succeeded To display the VLAN tag configuration (for an explanation of the flags, refer to portShow): switch:admin> portshow vlantag ge2 Port: ge2 Interface Address VlanId L2CoS Flags Destination Address 192.168.2.10 200 5 Perm Net 0.0.0.0 192.168.0.20 100 0 Perm 192.168.0.10 192.168.0.21 200 0 Perm 192.168.0.11 2000::20 300 0 Perm 2000::10 2000::21 400 0 Perm 2000::11 switch:admin> To delete a VLAN tag entry: switch:admin> portcfg vlantag ge2 delete 192.168.2.10 200 Operation Succeeded Function Synopsis Commands supported only on the Brocade 7800 and the Brocade FX8-24 platforms portcfg action [slot/]ve_port options arguments Description Use this command to configure FCIP tunnels and FCIP circuits on the GbE/10GbE ports on the Brocade 7800 and FX8-24 platforms only. The FCIP tunnels on the local and remote GbE ports act as Virtual E_Ports (VE_Ports) connecting the local and remote fabrics. The following operations can be performed with this command: 618 Fabric OS Command Reference 53-1001764-02