Dell PowerEdge M910 Fabric OS Command Reference Manual Supporting Fabric - Page 978
syslogdFacility, Synopsis, Description, syslogdIpAdd, Operands, Examples, See Also, syslogdIpRemove
View all Dell PowerEdge M910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 978 highlights
2 syslogdFacility syslogdFacility Synopsis Sets or displays the syslog facility. syslogdFacility [-l level] Description Use this command to set the syslog facility to a specified log file, or use this command without operands to display the current syslog facility. The syslog daemon (syslogd) reads and forwards system messages to the log file specified by this command. You must configure the servers to receive system messages by adding them with the syslogdIpAdd command. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands: -l level Specifies the syslog facility. Valid levels are 0 through 7. The default is 7. This operand is optional; if omitted, the current facility is displayed. 0 - LOG_LOCAL0 1 - LOG_LOCAL1 2 - LOG_LOCAL2 3 - LOG_LOCAL3 4 - LOG_LOCAL4 5 - LOG_LOCAL5 6 - LOG_LOCAL6 7 - LOG_LOCAL7 (default) Examples To set the syslog facility to LOG_LOCAL1: switch:admin> syslogdfacility -l 1 Syslog facility changed to LOG_LOCAL1 To display the current setting: switch:admin> syslogdfacility LOG_LOCAL1 See Also syslogdIpAdd, syslogdIpRemove, syslogdIpShow 946 Fabric OS Command Reference 53-1001764-02