Dell PowerEdge MX7000 EMC PowerEdge MX7000 Enclosure Installation and Service - Page 42
Removing a MX7000 blank from Fabric C slot, Installing a MX7000 blank in Fabric C slot
View all Dell PowerEdge MX7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Next steps 1. Connect the cables to the module. Removing a MX7000 blank from Fabric C slot Steps 1. Press the release button to release the blank. 2. Pull the blank out of the enclosure. NOTE: To maintain proper airflow, ensure that the blanks are installed if the MX7000 IOMs is not installed. Figure 32. Removing a blank from Fabric C slot Next steps 1. Install the module in the Fabric C slot or a blank. Installing a MX7000 blank in Fabric C slot Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Remove the module from Fabric C slot. Steps 1. Align and insert the blank in the empty slot. 2. Push the blank until it locks into place. 42 Installing and removing system components
Next steps
1.
Connect the cables to the module.
Removing a MX7000 blank from Fabric C slot
Steps
1.
Press the release button to release the blank.
2.
Pull the blank out of the enclosure.
NOTE:
To maintain proper airflow, ensure that the blanks are installed if the MX7000 IOMs is not installed.
Figure 32. Removing a blank from Fabric C slot
Next steps
1.
Install the module in the Fabric C slot
or
a blank
.
Installing a MX7000 blank in Fabric C slot
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
2.
Remove the module from Fabric C slot
.
Steps
1.
Align and insert the blank in the empty slot.
2.
Push the blank until it locks into place.
42
Installing and removing system components