Dell PowerEdge MX7000 EMC PowerEdge MX7000 Enclosure Installation and Service - Page 44
Installing a MX7000 module into Fabric C slot
View all Dell PowerEdge MX7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Figure 34. Removing a MX7000 module from Fabric C slot Next steps 1. Install a module into Fabric C or Install a blank. 2. Connect the cables to the module. Installing a MX7000 module into Fabric C slot Prerequisites 1. Follow the safety guidelines listed in Safety instructions. Steps 1. Align and push the I/O module into the enclosure. 2. Close the release lever to lock the module in place. 44 Installing and removing system components
Figure 34. Removing a MX7000 module from Fabric C slot
Next steps
1.
Install a module into Fabric C
or
Install a blank
.
2.
Connect the cables to the module.
Installing a MX7000 module into Fabric C slot
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
Steps
1.
Align and push the I/O module into the enclosure.
2.
Close the release lever to lock the module in place.
44
Installing and removing system components