Dell PowerEdge R740 iDRAC9 with Lifecycle Controller Version 3.30.30.30 RACADM - Page 117

• Generate and download a CSR for Factory Identity type to local file system using local RACADM racadm sslcsrgen -g -f c:\csr\csrtest.txt -t 2 NOTE: Before a CSR can be generated, the CSR fields must be configured in the RACADM iDRAC.Security group. For example: racadm set iDRAC.security.commonname MyCompany NOTE: In Telnet or SSH console, you can only generate and not download the CSR file. sslkeyupload Table 92. Details of sslkeyupload Description Uploads SSL key from the client to iDRAC. To run this subcommand, you must have the Server Control privilege. Synopsis Input racadm sslkeyupload -t -f • -t - Specifies the key to upload. The value is: • 1 - SSL key used to generate the server certificate. • -f - Specifies the filename of the SSL key that must be uploaded. Output Example If upload is successful, the message SSL key successfully uploaded to the RAC is displayed. if upload is unsuccessful, error message is displayed. racadm sslkeyupload -t 1 -f c:\sslkey.txt sslresetcfg Table 93. Details sslresetcfg Description Restores the web-server certificate to factory default and restarts web-server. The certificate takes effect 30 seconds after the command is entered. To run this subcommand, you must have the Configure iDRAC privilege. Synopsis racadm sslresetcfg Input Example N/A racadm sslresetcfg Certificate generated successfully and webserver restarted. storage Table 94. Details of storage Description Allows you to run the commands to control storage arrays. To run this subcommand for configuring the storage properties, you must have the server control permission. Synopsis Inventory RACADM Subcommand Details 117