Dell PowerEdge R740 iDRAC9 with Lifecycle Controller Version 3.30.30.30 RACADM - Page 120

• To generate and view information about the inventory of EMMs, run the following command: racadm storage get emms -refkey racadm storage get emms --refkey -o racadm storage get emms --refkey -o -p • To generate and view information about the inventory of PSU, run the following command: racadm storage get psus -refkey racadm storage get psus --refkey -o racadm storage get psus --refkey -o -p Configuration • To view the help details for a configuration command, run the following command: racadm storage help where command can take below values converttoraid, converttononraid, controllers, clearconfig, createsecuritykey, createvd, deletesecuritykey, deletevd, encryptvd, enclosures, emms, fans, hotspare, importconfig, ccheck, cryptographicerase, preparetoremove, blink, unblink, cancelcheck, renamevd, cancelbgi, rebuild, cancelrebuild, capacityexpanon, raidlevelmigrationinit, modifysecuritykey, psus, pdisks, resetconfig, tempprobes, vdisks, patrolread, forceonline, forceoffline,replacephysicaldisk,unlock,and setbootvd. NOTE: iSM must be running on the operating system to run the preparetoremove method • To create, delete, and secure the virtual disks. To start or stop the consistency check on the specified virtual disk, run the following command: racadm storage createvd: -rl {r0|r1|r5|r6|r10|r50|r60}[-wp {wt|wb|wbf}] [-rp {nra|ra|ara}] [-ss {1k|2k|4k|8k|16k|32k|64k|128k|256k| 512k|1M|2M|4M|8M|16M}]-pdkey: [-dcp {enabled| disabled|default}] [-name ] [-size {b|k|m|g|t}] [T10PIEnable] 120 RACADM Subcommand Details