Dell PowerEdge R740 iDRAC9 with Lifecycle Controller Version 3.30.30.30 RACADM - Page 98

Synopsis Input Example Local RACADM proxy usage racadm --proxy Remote RACADM proxy usage racadm -u -p -r --proxy NOTE: • The attribute racadm getconfig -g cfgractuning -o cfgRacTuneChassisMgmtAtServer must be set as non-zero in CMC. • The attribute racadm get system.ChassisControl.ChassisManagementMonitoring attribute must be enabled in iDRAC. • --proxy must be entered at the end of the command. • The root privilege is the default privilege for Local RACADM proxy. • The user privilege in the Remote RACADM proxy for CMC maps to iDRAC privilege. Table 73. Details of CMC and iDRAC privilege for an operation Required CMC Privilege for an operation Required iDRAC Privilege for proxy operation CMC Login User Login Chassis Configuration Administrator Configure User Configuration Administrator Configure User Clear Logs Administrator Logs Chassis Control Administrator System Control Server Administrator System Control Test Alert User System Operations Debug Command Administrator Debug Fabric x Administrator (where x is A, B, or C) System Control • When CMC is not placed on the network, the import, export, and file operation commands to CIFS, NFS, or FTP will fail. • When the Remote or Local RACADM Proxy operation is in progress, if the iDRAC is reset, then the Proxy operation fails and the output is not displayed in Remote or Local RACADM. • When racadm getsystem.ChassisControl.ChassisManagementMonitoring attribute is set to monitor, all the users including root users can only view the attribute. To configure, set the attribute to monitor and manage in CMC. • -u - Specifies the user name of the remote share that stores the catalog file. • -p - Specifies the password of the remote share that stores the catalog file. • -r - Specifies the iDRAC IP address connected to CMC. Local RACADM racadm getractime --proxy Remote RACADM racadm getractime -u root -p xxx -r 192.168.0 getractime --proxy 98 RACADM Subcommand Details