Dell PowerEdge T140 EMC Technical Specifications - Page 11
Video specifications, Environmental specifications
View all Dell PowerEdge T140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Video specifications The Dell EMC PowerEdge T140 system supports Matrox G200eR2 graphics card with 16 MB capacity. Table 10. Supported video resolution options Resolution Refresh rate 640x480 60, 70 Color depth (bits) 8, 16, 24 800x600 60, 75, 85 8, 16, 24 1024x768 60, 75, 85 8, 16, 24 1152x864 60, 75, 85 8, 16, 24 1280x1024 60, 75 8, 16, 24 Environmental specifications NOTE: For additional information about environmental certifications, refer to the Product Environmental Datasheet located with the Manuals & Documents on www.dell.com/support/home. Table 11. Temperature specifications Temperature Storage Continuous operation (for altitude less than 950 m or 3117 ft) Fresh air Maximum temperature gradient (operating and storage) Specifications -40-65°C (-40-149°F) 10-35°C (50-95°F) with no direct sunlight on the equipment For information about fresh air, see the Expanded operating temperature section. 20°C/h (68°F/h) Table 12. Relative humidity specifications Relative humidity Storage Operating Specifications 5% to 95% RH with 33°C (91°F) maximum dew point. Atmosphere must be noncondensing at all times. 10% to 80% RH with 29°C (84.2°F) maximum dew point. Table 13. Maximum vibration specifications Maximum vibration Specifications Operating 0.26 Grms at 5 Hz to 350 Hz (all operation orientations) Storage 1.88 Grms at 10 Hz to 500 Hz for 15 minutes (all six sides tested) Table 14. Maximum shock pulse specifications Maximum shock pulse Specifications Operating Six consecutively executed shock pulses in the positive and negative x, y, and z axis of 6 G for up to 11 ms. Storage Six consecutively executed shock pulses in the positive and negative x, y, and z axis (one pulse on each side of the system) of 71 G for up to 2 ms. Technical specifications 11