Dell PowerEdge T140 EMC Technical Specifications - Page 9

NOTE: When selecting or upgrading the system configuration, to ensure optimum power utilization, verify the system power consumption with the Dell Energy Smart Solution Advisor available at Dell.com/ESSA. System battery specifications The Dell EMC PowerEdge T140 system supports CR 2032 3.0-V lithium coin cell system battery. Expansion card specifications The Dell EMC PowerEdge T140 system supports up to four PCI express (PCIe) Generation 3. Table 5. Expansion card slots supported on the system board PCIe slot Slot 1 (Gen3) Processor Connection PCIe slot height Processor Full Height PCIe slot length Half Length Slot 2 (Gen3) Processor Full Height Half Length Slot 3 (Gen3) Platform Controller Hub Full Height Half Length Slot 4 (Gen3) Platform Controller Hub Full Height Half Length Slot width x8 link in x8 slot x8 link in x16 slot x1 x4 link in x8 slot NOTE: The expansion cards are not hot swappable. Memory specifications The Dell EMC PowerEdge T140 system supports the following memory specifications for optimized operation: Table 6. Memory specifications DIMM type DIMM rank Single rank DIMM capacity 8 GB Minimum RAM 8 GB Maximum RAM 32 GB UDIMM Dual rank 16 GB 8 GB 16 GB 8 GB 64 GB 32 GB Table 6. Memory specifications 16 GB 16 GB 64 GB Memory module sockets Four 288-pin Speed 2666 MT/s 2400 MT/s 2133 MT/s Storage controller specifications The Dell EMC PowerEdge T140 system supports the following controller cards: Table 7. Dell EMC PowerEdge T140 system controller cards Internal controllers External controllers • PERC H730P • PERC H330 • HBA330 • 12Gbps SAS Ext. HBA Technical specifications 9