Dell PowerEdge UPS 500T JY9T4 Environmental Probe (EMP) User’s Guide - Page 11
Connecting the Cable, fastener to the rail and the other
View all Dell PowerEdge UPS 500T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
2 Locate the Ethernet cable (supplied). Connect one end of the cable to the RJ-45 port on the EMP, then connect the other end to the Settings port on the Network Management Card (see Figure 4). EMP Network Management Card Figure 4. Connecting the Cable NOTE: If the configuration cable is still attached to the Network Management Card, remove and store it for future use. NOTE: If the supplied cable is not long enough for your installation, you can use another Ethernet cable up to a length of 10m (33 ft). 3 The EMP can be mounted to the wall or the rack post, or placed on the UPS. • The EMP has a universal slot on the rear for easy mounting on a screw in any direction. Use the supplied screw and anchor to mount the EMP. • To mount the EMP to the rack post, attached one VELCRO® fastener to the rail and the other VELCRO fastener to the EMP. Press the two VELCRO strips together to secure the EMP to the rail post. 4 Use the supplied tie wraps to secure the Ethernet cable out of the way as needed. 5 Verify that the Network Management Card has a network connection, is installed in a UPS, and the UPS is plugged in and turned on. The EMP is automatically recognized by the Network Management Card. NOTE: If the Environment menu does not display on the menu bar, click your Web browser's Refresh button to update the page. Installation 5