Dell PowerEdge UPS 500T JY9T4 Environmental Probe (EMP) User’s Guide - Page 7
Introduction, Features
View all Dell PowerEdge UPS 500T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Introduction The Dell™ Environmental Monitoring Probe (EMP) is an optional connectivity device that lets you remotely monitor the temperature, humidity, and status of two contact devices through a standard Web browser, providing greater power management control and flexible monitoring. Use the EMP with any Dell UPS equipped with a Dell Network Management Card (firmware v01.10.xxxx or later). NOTE: Download firmware updates for the Network Management Card from www.dellups.com. Figure 1. The EMP Features The EMP has the following features: • Hot-swappable feature simplifies installation by letting you install the probe safely without powering down the card or critical UPS load. • Monitors temperature and humidity information of any desired environment to protect your critical equipment. • Measures temperatures between 0 and 70°C with an accuracy of ±2°C. • Measures relative humidity between 0 and 100% RH with an accuracy of ±5%. • Can be located away from the card with Ethernet cable up to 10m (33 ft) long. • Monitors the status of two user-provided contact devices. • Temperature, humidity, and contact closure status can be displayed through a Web browser, an Internet-ready cell phone or PDA, or SNMP management software. • User-selectable alarm thresholds let you to define acceptable temperature or humidity limits. • E-mail notification through SMTP (simple mail transport protocol) using e-mail client software when acceptable alarm limits are exceeded or contacts status changes. • Changes in contact closure status are logged in the card's Event History log. Introduction 1