Dell PowerEdge UPS 500T JY9T4 Environmental Probe (EMP) User’s Guide - Page 14
Changing Environment Settings
View all Dell PowerEdge UPS 500T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Changing Environment Settings On the Environment Settings page you can: • Set the temperature and humidity thresholds that trigger a notification (and a graceful shutdown of the protected systems). • Configure and enable both contacts, as well as set upper and lower ranges of temperature and humidity that will generate SNMP Traps, and e-mail notification (if the card is configured to do so). 1 Select Settings from the Environment menu to display the Environment Settings page (see Figure 7). Figure 7. Environment Settings Page (Advanced Parameters Shown) 8 Configuring the EMP
8
Configuring the EMP
Changing Environment Settings
On the Environment Settings page you can:
•
Set the temperature and humidity thresholds that trigger a notification (and a graceful shutdown of
the protected systems).
•
Configure and enable both contacts, as well as set upper and lower ranges of temperature and
humidity that will generate SNMP Traps, and e-mail notification (if the card is configured to do so).
1
Select
Settings
from the Environment menu to display the Environment Settings page (see Figure 7).
Figure 7. Environment Settings Page (Advanced Parameters Shown)