Dell PowerEdge Web Server Dell PowerEdge FTOS Command Line Reference Guide for - Page 167
show arp, show hosts Command Example, Table 12-1.
View all Dell PowerEdge Web Server manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Example Figure 12-3. show hosts Command Example FTOS#show hosts Default domain is not set Name/address lookup uses static mappings Name servers are not set Host Flags TTL -------- ----- ---- ks (perm, OK) - 4200-1 (perm, OK) - 1230-3 (perm, OK) - ZZr (perm, OK) - Z10-3 (perm, OK) - FTOS# Type ---- IP IP IP IP IP Address ------2.2.2.2 192.68.69.2 192.68.99.2 192.71.18.2 192.71.23.1 Table 12-1. show hosts Command Example Fields Field Default domain... Name/address lookup... Name servers are... Host Flags TTL Type Address Description Displays the domain name (if configured). States if DNS is enabled on the system. If DNS is enabled, the Name/Address lookup is domain service. If DNS is not enabled, the Name/Address lookup is static mapping. Lists the name servers, if configured. Displays the host name assigned to the IP address. Classifies the entry as one of the following: • perm - the entry was manually configured and will not time out • temp - the entry was learned and will time out after 72 hours of inactivity. Also included in the flag is an indication of the validity of the route: • ok - the entry is valid. • ex - the entry expired. • ?? - the entry is suspect. Displays the amount of time until the entry ages out of the cache. For dynamically learnt entries only. Displays IP as the type of entry. Displays the IP address(es) assigned to the host. show arp Displays the ARP table. Syntax show arp [interface interface | ip ip-address [mask] | macaddress mac-address [mac-address mask]] [static | dynamic] [summary] IPv4 Routing | 165