Dell PowerEdge Web Server Dell PowerEdge FTOS Command Line Reference Guide for - Page 187
Layer 2, Overview, MAC Addressing Commands, Virtual LAN (VLAN) Commands
View all Dell PowerEdge Web Server manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
15 Layer 2 Overview This chapter describes commands to configure Layer 2 features. It contains the following sections: • MAC Addressing Commands • Virtual LAN (VLAN) Commands MAC Addressing Commands The following commands are related to configuring, managing, and viewing MAC addresses: • clear mac-address-table dynamic • show cam mac stack-unit Virtual LAN (VLAN) Commands The following commands configure and monitor virtual local area networks (VLANs). VLANs are a virtual interface and use many of the same commands as physical interfaces. You can configure an IP address and Layer 3 protocols on a VLAN called Inter-VLAN routing. FTP, TFTP, ACLs, and SNMP are not supported on a VLAN. Occasionally, while sending broadcast traffic over multiple Layer 3 VLANs, the virtual router redundancy protocol (VRRP) state of a VLAN interface may continually switch between Master and Backup. For more information, also refer to Virtual LAN (VLAN) Commands. Layer 2 | 185