Dell PowerVault 50F Dell PowerVault 51F 8-Port Fibre Channel Switch Insta - Page 97
interfaceShow, <port#>
View all Dell PowerVault 50F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
support.dell.com Table 4-19. fspfShow Command Field Descriptions Field Description version The version of the FSPF protocol. domainID The local switch's domain ID. isl_ports A bitmap field that shows all local switch E_Ports. startTime The time the FSPF started, in milliseconds from boot. other The other fields represent internal FSPF variables. interfaceShow The interfaceShow command displays FSPF interface information. This includes static information about the port (for example, variables allocated even when a port is down), and "neighbor" information which includes variables associated with the remote switch connected to the port. A FSPF interface corresponds to an E_Port. The static information fields are described in Table 4-20. Neighbor information fields are described in Table 4-21. With no parameters, it shows the information for all switch interfaces. The command syntax is interfaceShow . Table 4-20. interfaceShow Command Static Field Descriptions Field Description idbP The current neighbor state. Its value must be NB_ST_FULL for the ISL to forward frames to the adjacent switch. Other values may be transitory, however if a value is retained for more than ten seconds, contact Dell for technical assistance. nghbP Neighbor capabilities has a value of 0. ifNo The port number. It should be identical to the value specified in the command line. cost The cost of sending a frame over the ISL connected to this port. The value 1000 indicates a 1-gigabits per second (Gbps) link. delay The conventional delay incurred by a frame transmitted on this ISL. It is required by the FSPF protocol, and is a fixed value. lastScn Last State Change Notification (SCN) received on this interface. lastScnTime Time the last SCN was received. upCount The number of times this interface initialized (the transition number from an offline to E_Port state). PowerVault 51F Commands 4-35