Dell PowerVault LTO4-120HH Dell PowerVault LTO5-140HH Tape Drive (IBM) v2 User - Page 29
Step 6, Attaching SAS Cable
View all Dell PowerVault LTO4-120HH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Figure 8. Mounting Holes on Tape Drive 1. M-3 mounting screw holes Do not secure the drive with screws at this point because you may have to move the drive to get the cables in place. Step 6 - Attaching SAS Cable Attach the system SAS cable to the drive SAS connector, as shown in Figure 9, number 1. NOTE: You do not need to connect a separate power cable. Power is supplied through the SAS cable.
Figure 8. Mounting Holes on Tape Drive
1.
M-3 mounting screw holes
Do not secure the drive with screws at this point because you may have to move the drive to get the cables in place.
Step 6
—
Attaching SAS Cable
Attach the system SAS cable to the drive SAS connector, as shown in
Figure 9
, number 1.
NOTE: You do not need to connect a separate power cable. Power is supplied through the SAS cable.