Dell PowerVault NX3000 Hardware Owner's Manual - Page 153
Troubleshooting a Damaged System, Troubleshooting the System Battery
View all Dell PowerVault NX3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
If the system does not start properly, see "Getting Help." 8 If the system starts properly, shut down the system and reinstall the rest of the components that you removed in step 3. See "Installing an Expansion Card." 9 Run the appropriate online diagnostic test. See "Using Dell™ Diagnostics." If the tests fail, see "Getting Help." Troubleshooting a Damaged System WARNING: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. Before you begin this procedure, review the safety instructions that came with the system. 1 Turn off the system and attached peripherals, and disconnect the system from the electrical outlet. 2 Open the system. See "Opening the System." 3 Ensure that the following components are properly installed: • Expansion cards and both expansion-card risers • Power supplies • Fans and cooling shroud • Processors and heat sinks • Memory modules • Hard-drive carriers 4 Ensure that all cables are properly connected. 5 Close the system. See "Closing the System." 6 Run the system board tests in the system diagnostics. See "Running the Embedded System Diagnostics." If the tests fail, see "Getting Help." Troubleshooting the System Battery 1 Re-enter the time and date through the System Setup program. See "Using the System Setup Program and UEFI Boot Manager." Troubleshooting Your System 153