Dell PowerVault NX3000 Hardware Owner's Manual - Page 31
E171F PCIe fatal, E1A11 PCI Riser
View all Dell PowerVault NX3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Table 1-1. LCD Status Messages (continued) Code Text Cause Corrective Actions E171F PCIe fatal error on Bus ## Device ## Function ## The system BIOS has reported a PCIe fatal error on a component that resides in PCI configuration space at bus ##, device ##, function ##. Remove and reseat the PCIe expansion cards. If the problem persists, see "Troubleshooting Expansion Cards." PCIe fatal error on Slot #. Review & clear SEL. The system BIOS has Reinstall the expansion- reported a PCIe fatal error card riser. See "Expansion on a component that Cards and Expansion- resides in the specified slot. Card Risers." If the problem persists, the riser card or system board is faulty. See "Getting Help." E1810 Hard drive ## The specified hard drive fault. Review has experienced a fault. & clear SEL. See "Troubleshooting a Hard Drive." E1812 Hard drive ## The specified hard drive Information only. removed. has been removed from the Check drive. system. E1A11 PCI Riser PCIe risers are not hardware & configured correctly. Some configuration invalid configurations mismatch. prevent the system from Reconfigure. powering on. Reinstall the expansioncard riser. See "Expansion Cards and ExpansionCard Risers." If the problem persists, the riser card or system board is faulty. See "Getting Help." E1A12 PCI Riser not detected. Check Riser. One or both of the PCIe risers are missing. This prevents the system from powering on. Reinstall the missing riser card(s). See "Replacing Expansion-Card Riser 1" and "Replacing Expansion-Card Riser 2." About Your System 31