Dell Powerconnect W-ClearPass Hardware Appliances W-CP500 Hardware Installatio - Page 11

7. Rail Installation on the Appliance Locate the fixed chassis rails that were put aside in 6A or 6B, Step 1 on pages 8 or 9. • Mount the inner fixed chassis rails to each side of the appliance using three M4 x 4 truss head screws on the left and right sides as shown. 8. Installing the Appliance in the Rack • Align the inner fixed chassis rails on the appliance with the outer fixed chassis rails previously installed in the rack. • Carefully slide the appliance into these rails until you hear them click into place. • Push the appliance all the way back into the rack until it stops. • Secure the unit in the rack by inserting and tightening two M6 x 6* screws, one on each side. * NOTE: Refer to your rack's mounting hardware for the proper size and type of screws to secure the appliance in the rack. NOTE: When removing the appliance from either rack type, you will need to press down on the locking tab in order to release it from the rack. Carefully slide it out supporting the unit on both sides at all times. W-ClearPass 500 Hardware Installation Guide 11