Dell Precision 5540 Service Manual - Page 21

Installing the Battery, PCIe Solid State Drive (SSD), Removing M.2 Solid State Drive -SSD

Get Dell Precision 5540 PDF manuals and user guides View all Dell Precision 5540 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

• Do not bend • Do not use tools of any kind to pry on or against the battery • If a battery cannot be removed within the constraints above, please contact Dell technical support Installing the Battery 1. Place and align the battery in the battery bay. 2. Tighten the M2x4 (7) screws that secure the battery to the computer. 3. Connect the battery cable to the system board. 4. Install the base cover. 5. Follow the procedures in After Working Inside Your Computer. PCIe Solid State Drive (SSD) Removing M.2 Solid State Drive -SSD 1. Follow the procedures in Before Working Inside Your Computer 2. Remove the: a. base cover b. battery 3. Remove the M2x3 (1) screw that secures the M.2 solid-state drive (SSD) to the system board [1]. 4. Lift the M.2 solid-state drive (SSD) from the system board [2]. Disassembly and reassembly 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
•
Do not
bend
•
Do not
use tools of any kind to pry on or against the battery
•
If a battery cannot be removed within the constraints above, please contact Dell technical support
Installing the Battery
1.
Place and align the battery in the battery bay.
2.
Tighten the M2x4 (7) screws that secure the battery to the computer.
3.
Connect the battery cable to the system board.
4.
Install the base cover.
5.
Follow the procedures in
After Working Inside Your Computer
.
PCIe Solid State Drive (SSD)
Removing M.2 Solid State Drive -SSD
1.
Follow the procedures in
Before Working Inside Your Computer
2.
Remove the:
a.
base cover
b.
battery
3.
Remove the M2x3 (1) screw that secures the M.2 solid-state drive (SSD) to the system board [1].
4.
Lift the M.2 solid-state drive (SSD) from the system board [2].
Disassembly and reassembly
21