Dell Precision 5540 Service Manual - Page 27

Installing the Memory Modules, System fan, Removing the Fans

Get Dell Precision 5540 PDF manuals and user guides View all Dell Precision 5540 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

b. battery 3. Pry the securing clips away from the memory module until it pops-up [1]. Then, remove the memory module from its connector on the system board [2]. Installing the Memory Modules 1. Insert the memory module into the memory socket. 2. Press the memory module down until it clicks into place. NOTE: If you do not hear the click, remove the memory module and re-install it. 3. Install the: a. Battery b. Base cover 4. Follow the procedures in After Working Inside Your Computer. System fan Removing the Fans 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a. base cover b. battery 3. Perform the following steps to remove the left video-card fan: a. Release the Mylar tape that secures the cable to the system board [1]. b. Disconnect the fan cable from the system board [2] c. Remove the M2x4 (2) screws that secure the fan to the system board [3]. d. Lift the fan away from the computer [4] Disassembly and reassembly 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
b.
battery
3.
Pry the securing clips away from the memory module until it pops-up [1]. Then, remove the memory module from its connector on the
system board [2].
Installing the Memory Modules
1.
Insert the memory module into the memory socket.
2.
Press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and re-install it.
3.
Install the:
a.
Battery
b.
Base cover
4.
Follow the procedures in
After Working Inside Your Computer
.
System fan
Removing the Fans
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a.
base cover
b.
battery
3.
Perform the following steps to remove the left video-card fan:
a.
Release the Mylar tape that secures the cable to the system board [1].
b.
Disconnect the fan cable from the system board [2]
c.
Remove the M2x4 (2) screws that secure the fan to the system board [3].
d.
Lift the fan away from the computer [4]
Disassembly and reassembly
27