Dell Precision 5540 Service Manual - Page 41
Installing the Display Assembly, Antenna cover, Removing antenna
View all Dell Precision 5540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Installing the Display Assembly 1. Place the palm-rest assembly at the edge of the table with the speakers facing away from the edge. 2. Align the screw holes on the palm-rest assembly with the screw holes on the display hinges. 3. Replace the M2.5 x 5 (6) screws that secure the display hinges to the palm-rest assembly. 4. Route thetouchscreen cable through the routing guides on the fan. 5. Connect thetouchscreen cable and display cable to the system board. 6. Replace the screw (2) that secures the display-cable bracket to the system board. 7. Install the: a. Battery b. Base cover 8. Follow the procedures in After Working Inside Your Computer Antenna cover Removing antenna 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a. base cover b. battery c. WLAN card d. display assembly Disassembly and reassembly 41