Dell Precision 5540 Service Manual - Page 40
base cover, battery
View all Dell Precision 5540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
a. base cover b. battery 3. Perform the following steps: a. Release the Mylar tape that secures the display cable to the system board [1]. b. Lift the latch and disconnect the display cable from the connector on the system board [2]. c. Release the Mylar tape that secures the display cable to the system board [3]. d. Remove the M2x4 (2) screws and lift the metal bracket that holds the left video-card fan to the system board [4]. e. Un-route the display cable from the restraints clips [5] f. Disconnect the display cable from the system board [6]. 4. To remove the display assembly: a. Place the computer at the edge of a flat surface and remove the M2.5x5 (6) screws securing the display assembly to the system chassis [1]. b. Lift the display assembly away from the system chassis [2]. 40 Disassembly and reassembly