Dell S2409WFP User's Guide - Page 8

Pixel pitch Viewing angle Luminance output Contrast ratio Faceplate coating Backlight Response Time Color Gamut 0.276 mm 160° (vertical) typical, 170° (horizontal) typical 300 CD/m ²(typical) 1000 to 1 (typical) Antiglare with hard-coating 3H CCFL edgelight system 5 ms typical 85%* * S2409W Color Gamut (Typical) is based on CIE1976 (85%) and CIE1931 (72%). Resolution Horizontal scan range Vertical scan range Optimal preset resolution Highest preset resolution 30 kHz to 83 kHz (automatic) 50 Hz to 76 Hz (automatic) 1920 x 1080 at 60 Hz 1920 x 1080 at 60 Hz Video Supported Modes Video display capabilities (DVI playback) Video display capabilities (HDMI playback) 480i/480p/576i/576p/720p/1080i/1080p (Supports HDCP) 480i/480p/576i/576p/720p/1080i/1080p Preset Display Modes Display Mode VGA, 720 x 400 VGA, 640 x 480 VESA, 640 x 480 VESA, 800 x 600 VESA, 800 x 600 VESA, 1024 x 768 VESA, 1024 x 768 VESA, 1152 x 864 VESA, 1280 x 1024 VESA, 1280 x 1024 VESA, 1920 x 1080 VESA, 1920 x 1080 Horizontal Frequency (kHz) 31.5 31.5 37.5 37.9 46.9 48.4 60.0 67.5 64.0 80.0 67.2 66.6 Vertical Pixel Clock Sync Polarity Frequency (Hz) (MHz) (Horizontal/Vertical) 70.1 28.3 -/+ 59.9 25.2 -/- 75.0 31.5 -/- 60.3 40.0 +/+ 75.0 49.5 +/+ 60.0 65.0 -/- 75.0 78.8 +/+ 75.0 108.0 +/+ 60.0 108.0 +/+ 75.0 135.0 +/+ 60.0 173.0 -/+ 59.9 138.5 +/- Electrical Video input signals Synchronization input signals AC input voltage/frequency/current Inrush iso surge current Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input impedance Digital DVI-D TMDS, 600mV for each differential line, positive polarity at 50 ohm input impedance HDMI, 600mV for each differential line, 100 ohm input impedance per differential pair Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG (Composite SYNC on green) 100 to 240 VAC/50 or 60 Hz + 3 Hz/2.0A (Max.) 120 V: 30 A (Max.) 240 V: 60 A (Max.)