Dell S2719DM Monitor Users Guide - Page 13

Power Management Modes If you have VESA's DPM-compliant video card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as power save mode*. If the computer detects input from the keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature. VESA Modes Normal operation Active-off mode Switch off Horizontal Vertical Video Power Indicator Sync Sync Active Active Active White Inactive - Inactive Off - - White (Glowing) Off Power Consumption 42 W (maximum)** 29 W (typical) Less than 0.5 W Less than 0.3 W Power Consumption Pon 20.74 W Total Energy Consumption (TEC) 65.24 kWh The OSD operates only in the normal operation mode. If you press any button in the activeoff mode, the following message is displayed: *Zero power consumption in OFF mode can only be achieved by disconnecting the AC mains cable from the monitor. **Maximum power consumption with maximum luminance, and USB active. This document is informational only and reflects laboratory performance. Your product may perform differently, depending on the software, components and peripherals you ordered and shall have no obligation to update such information. Accordingly, the customer should not rely upon this information in making decisions about electrical tolerances or otherwise. No warranty as to accuracy or completeness is expressed or implied. Activate the computer and the monitor to gain access to the OSD. NOTE: Pon: Power consumption of On Mode measured with reference to Energy Star test method. TEC: Total energy consumption in kWh measured with reference to Energy Star test method. About Your Monitor | 13