Dell TrueMobile 4350 Dell™ Wireless 4350 Small Network Access PointU - Page 249
The Dell Wireless 4350 Small Network Access Point CD Setup Wizard program does not run
View all Dell TrueMobile 4350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
6. Check the Obtain an IP address automatically option. If you are using a manually assigned IP address for the client, the IP address for the client must be on the same subnet as the Dell Wireless 4350 Small Network Access Point: 1. Follow the instructions above to access the Internet Protocol (TCP/IP) Properties window. 2. Ensure the option Use the following IP address is selected. 3. Ensure the value in the Subnet mask field matches that for the Dell Wireless 4350 Small Network Access Point. If you are using a DHCP server to provide an IP address to the Dell Wireless 4350 Small Network Access Point, you must determine the address that was provided by the DHCP server. For assistance on getting the IP address from the DHCP server, see the documentation for your server or contact your network administrator. Make sure that the Dell Wireless 4350 Small Network Access Point is properly installed and configured: 1. Make sure that the Power light on the front of the Access Point is lit. 2. Make sure that the LAN light on the front of the Access Point is lit. The LAN LED indicates a network connection. 3. Check the computer's network settings. Verify that the TCP/IP settings are correct. a. Open an MS-DOS command prompt window. b. Type ipconfig and press the key. 4. Compare the network portion of the address for the computer with that of the Access Point. The first three octets of the address should be the same. For example, if the Access Point's IP address is the default, 192.168.2.2, the computer's IP address should be in the range from 192.168.2.3 to 192.168.2.254; thus, it should appear as 192.168.2.xxx. Reset the Dell Wireless 4350 Small Network Access Point to its default settings. See How do I restart or reset the Access Point? The Dell Wireless 4350 Small Network Access Point CD Setup Wizard program does not run automatically after inserting the Installation CD into the CD-ROM drive. What should I do? 1. Click the Start button. 2. Click Run. The Open: window appears. 3. Type the following text in the Open: field: X:\setup.exe where X is the drive letter of your CD drive. 4. Click the OK button. How do I restart or reset the Dell Wireless 4350 Small Network Access Point ? To restart the Dell Wireless 4350 Small Network Access Point, unplug the power connector and plug it back in. To load the Dell Wireless 4350 Small Network Access Point's default settings, hold down the reset button on the router for at least five seconds. When the unit resets, the Power light will blink. NOTE: When you reset the Dell Wireless 4350 Small Network Access Point via the reset button, press it for at least five seconds, the current configurations will be erased and the factory default settings will be loaded on the unit. For customer support, go to support.dell.com.