Dell Vostro 20 Dell Vostro 203052 Owners Manual - Page 12
Installing the Power-Switch Board, Removing the System-Board Shield
View all Dell Vostro 20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installing the Power-Switch Board 1. Connect the power-switch cable to the power-switch board. Insert the power-switch board into its slot on the computer. 2. Install: a. back cover b. optical-disk drive c. stand 3. Follow the procedures in After Working Inside Your Computer. Removing the System-Board Shield 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a. stand b. optical-disk drive c. back cover 3. Perform the following steps as shown in the illustration: a. Remove the screws that secure the system-board shield to the computer [1]. b. Lift the system-board shield from the computer [2]. c. Remove the system-board shield from the computer [3]. 12
Installing the Power-Switch Board
1.
Connect the power-switch cable to the power-switch board. Insert the power-switch board into its
slot on the computer.
2.
Install:
a.
back cover
b.
optical-disk drive
c.
stand
3.
Follow the procedures in
After Working Inside Your Computer
.
Removing the System-Board Shield
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a.
stand
b.
optical-disk drive
c.
back cover
3.
Perform the following steps as shown in the illustration:
a.
Remove the screws that secure the system-board shield to the computer [1].
b.
Lift the system-board shield from the computer [2].
c.
Remove the system-board shield from the computer [3].
12