Dell Vostro 20 Dell Vostro 203052 Owners Manual - Page 22
Installing the System Board, Removing the Display Assembly, Before Working Inside Your Computer
View all Dell Vostro 20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Installing the System Board 1. Align the system board on the computer. 2. Tighten the screws to secure the system board to the computer. 3. Connect the following cables to the system board: a. camera cable b. display assembly cable c. system fan cable d. hard-drive cable e. hard-drive/optical-drive power cable f. power-switch cable g. speaker cable h. convertor cable 4. Install: a. memory (optional) b. WLAN card c. heatsink d. system-board shield e. back cover f. optical-disk drive g. stand 5. Follow the procedures in After Working Inside Your Computer. Removing the Display Assembly 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a. stand b. optical-disk drive 22
Installing the System Board
1.
Align the system board on the computer.
2.
Tighten the screws to secure the system board to the computer.
3.
Connect the following cables to the system board:
a.
camera cable
b.
display assembly cable
c.
system fan cable
d.
hard-drive cable
e.
hard-drive/optical-drive power cable
f.
power-switch cable
g.
speaker cable
h.
convertor cable
4.
Install:
a.
memory (optional)
b.
WLAN card
c.
heatsink
d.
system-board shield
e.
back cover
f.
optical-disk drive
g.
stand
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Display Assembly
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a.
stand
b.
optical-disk drive
22