Dell Vostro 20 Dell Vostro 203052 Owners Manual - Page 14

Installing the Memory, Removing the System Fan, system-board shield, back cover, optical-disk drive

Get Dell Vostro 20 PDF manuals and user guides View all Dell Vostro 20 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

Installing the Memory NOTE: Please use DIMM 2 slot if there is only one memory module available. 1. Align the notch on the memory-card with the tab on the system-board connector. 2. Press down on the memory module until the release tabs spring back to secure them in place. 3. Install: a. system-board shield b. back cover c. optical-disk drive d. stand 4. Follow the procedures in After Working Inside Your Computer. Removing the System Fan 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a. stand b. optical-disk drive c. back cover d. system-board shield 3. Perform the following steps as shown in the illustration: a. Disconnect the system fan cable from the system board [1]. b. Remove the screws that secure the system fan to the computer [2]. 4. Remove the system fan from the computer. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
Installing the Memory
NOTE:
Please use DIMM 2 slot if there is only one memory module available.
1.
Align the notch on the memory-card with the tab on the system-board connector.
2.
Press down on the memory module until the release tabs spring back to secure them in place.
3.
Install:
a.
system-board shield
b.
back cover
c.
optical-disk drive
d.
stand
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the System Fan
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a.
stand
b.
optical-disk drive
c.
back cover
d.
system-board shield
3.
Perform the following steps as shown in the illustration:
a.
Disconnect the system fan cable from the system board [1].
b.
Remove the screws that secure the system fan to the computer [2].
4.
Remove the system fan from the computer.
14