Dell Vostro 5620 Service Manual - Page 10
Removing and installing components, Recommended tools, Screw list
![]() |
View all Dell Vostro 5620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
2 Removing and installing components NOTE: The images in this document may differ from your computer depending on the configuration you ordered. Recommended tools The procedures in this document may require the following tools: ● Phillips screwdriver #0 ● Phillips screwdriver #1 ● Plastic scribe Screw list NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced. NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component. NOTE: Screw color may vary with the configuration ordered. Table 1. Screw list Component Base cover Screw type M2x7.5 - captive screws Quantity 2 Screw image Base cover 3-cell battery 4-cell battery Wireless card Solid-state drive Solid-state drive Fan Heat sink M2x4 M2x3 M2x3 M2x3 M2x3 M2x1.8 M2x3 captive screw 7 3 5 1 1 1 2 ● 7, for computers with discrete graphics processing units 10 Removing and installing components
![](/manual_guide/products/dell-vostro-5620-service-manual-9d6e476/10.png)