Dell Vostro 5620 Service Manual - Page 24
Installing the M.2 2230 solid-state drive
![]() |
View all Dell Vostro 5620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Steps 1. Remove the screw (M2x3) that secures the M.2 mounting bracket to the palm-rest and keyboard assembly. 2. Slide the M.2 2230 solid-state drive out of the solid-state drive slot. 3. Lift the M.2 2230 solid-state drive assembly off the system board. 4. Turn and place the M.2 2230 solid-state drive assembly on a dry and flat surface. 5. Remove the screw (M2x1.8) that secures the M.2 mounting bracket to the M.2 2230 solid-state drive. Installing the M.2 2230 solid-state drive Prerequisites If you are replacing a component, remove the existing component before performing the installation process. About this task NOTE: This procedure applies if you are installing an M.2 2230 solid-state drive. NOTE: The M.2 solid-state drive installed on your computer depends on the configuration ordered. The M.2 slot supports one of the following solid-state drives: ● M.2 2230 solid-state drive A mounting bracket for the M.2 2230 solid-state drive is required. The mounting bracket is provided if the M.2 2230 solid-state drive is shipped with the computer. If you are replacing the M.2 2230 solid-state drive with a new M.2 2230 solid-state drive, use the existing mounting bracket to install the latter. ● M.2 2280 solid-state drive If you are replacing the M.2 2280 solid-state drive (shipped with the computer) with an M.2 2230 solid-state drive, a mounting bracket for the M.2 2230 solid-state drive is required. Please contact Dell support to purchase the mounting bracket for the M.2 2230 solid-state drive. The following image(s) indicate the location of the M.2 2230 solid-state drive and provides a visual representation of the installation procedure. 24 Removing and installing components
![](/manual_guide/products/dell-vostro-5620-service-manual-9d6e476/24.png)