Dell Vostro 5620 Service Manual - Page 40
Lift the RJ-45 Network Port assembly off the I/O board.
View all Dell Vostro 5620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Steps 1. Remove the three screws (M2.5x5) that secure the right-display hinge of the display assembly to the system board. 2. Open the right-display hinge at an angle of 90 degrees. 3. Remove the three screws (M2x5) that secure the RJ-45 Network Port assembly to the I/O board. 4. Lift the RJ-45 Network Port assembly off the I/O board. 5. Peel the clear adhesive tape and lift the latch of the I/O-board cable. 6. Disconnect the I/O board cable from the I/O board. 7. Disconnect the coin-cell battery cable from the I/O board. 8. Lift the fingerprint-reader cable connector latch and disconnect the optional fingerprint-reader cable from the I/O board. 9. Remove the screw (M2x3) that secures the I/O board to the palm-rest and keyboard assembly. 10. Lift the I/O board off the palm-rest and keyboard assembly. 40 Removing and installing components